Fiber optic lighting for swimming pools
1.Application
2.Product 1(Optical fiber underwater light ):Fiber optic cable + Buried lights + light source with Waterproof box
1)Commonly used Fiber optic cable 1mm, 3mm , 5mm
2)Buried lights
3)Light source machine with stainless steel waterproof box (Can not be placed in water)
3.Questions and confirmation: 1)Products can be purchased separately
2)Design solutions for your swimming pool,due to this is a non-standard customized product ,please provide below :
*Swimming pool area
*what is the diameter will you go for ? how many fiber you want in each sqm ?
*The position of the light source
*Do you need the waterproof box?
*It would be better if you could send us a picture of your pool .
3)MOQ of fiber :50 m ,MOQ of Buried lights :20 pcs , MOQ of light source :1 sets
4)weight of fiber :0.01kg /m ,weight of Buried lights :0.02kg /pcs ,weight of light source :1.5kg /set
4.Installation
Schematic diagram of optical fiber wiring for swimming pool, square, aisle, corridor
5.Installation effect:
6.Product 2 (Fiber optic side wall light) :10 mm optical fiber + light source machine+ waterproof box
10 mm optical fiber
light source
waterproof box
Effect picture
7.Questions and confirmation: MOQ of fiber :100 m ,MOQ of light source :100set
Delivery :about 1 week
Weight of fiber 0.12kg /m ,weight of light source with waterproof box :1.5kg /set
8.Description:
Description:
Optical fiber is waterproof, light guide, non-conductive;
Light source voltage: 110V~220V
Light source machine: 45w, RGB. Not waterproof, you need a waterproof box, put the waterproof box on the shore,
Slowly introduce the optical fiber into the water from the position of the machine. Starting from the optical fiber, it is
not conductive because it is plastic and safe. The optical fiber for swimming pool is the safest solution.
9.installation:
The light source machine is placed on the shore with a waterproof box, a little far away from the swimming pool.
The optical fiber is fixed on the edge of the swimming pool (according to the situation on site. tie can also be fixed)
3.How to control the intensity of the light/how to use it with the light source, the light effect will be better?
One: 7~8 meters: optical fiber 1 head connected to light source, 15 meters: optical fiber 2 head connected to light
web://www.kinz-pof.com
Tel:400-160-8187 / 0769-81885756 / 0755-28347887
Email :info@kinz-pof.com
POF Plastic Optical Fiber Cable PMMA Fiber Optic